Skip to main content

Case details

The Case details view provides access to detailed results for each individual analysis case.

This view allows you to examine how a section behaves under a specific set of inputs, beyond the summary information shown in the Results table.

Case overview​

At the top of the Case details view, you can see the selected analysis case. You can scroll through the cases associated with the selected task to review their results individually.

ULS results​

When viewing ULS results, the Case details view provides access to:

  • The applied load on the section
  • The deformation under the applied load
  • The deformation at failure, assuming the applied load is extended to failure
  • Stress and strain values at key locations in:
    • The concrete section
    • The reinforcement

These results allow you to understand both the applied demand and the section response at and beyond the ultimate limit state.

SLS results​

When viewing SLS results, the Case details view allows you to review:

  • The applied load
  • The resulting deformations
  • The section stiffness
  • Stress–strain results for both:
    • Concrete
    • Reinforcement

If cracking occurs, crack results are also displayed, including crack‑related outputs where applicable.

Video overview​

The following video provides a visual overview of the Case details results view in AdSec:

Oasys AdSec: Results case details

Note
This video provides a visual overview of the Case details view. It may have been recorded using an earlier version of AdSec, so some details may differ from the version you have installed. ``