Results table
The Results table allows you to:
- Enter loads or deformations
- View summary results
- Check section status and utilisation
Inputting loads or deformations
Loads or deformations can be entered into the table by:
- Typing values directly into the cells, or
- Pasting values from an external source using the Control + V command.
Important note on load application
AdSec does not factor loads.
It is the user’s responsibility to ensure that:
- Appropriate ULS or SLS loads are applied
- Load combinations are defined correctly outside of AdSec
Viewing results
Different results can be displayed or hidden by clicking on Display. Results availability varies depending on analysis task definition.
This allows the table to be tailored for various uses.
ULS status
Based on the highest of the load and deformation utilisations, whichever is higher.
SLS status
Indicates whether the concrete section is considered cracked for serviceability analysis:
- Uncracked. The concrete tensile capacity is not exceeded.
- Cracked. The concrete tensile capacity is exceeded and cracked-section behaviour is assumed.
- Overloaded. When the section would collapse due to excessive loading.
User notes
Within the Table tab, custom annotations can also be stored. This text field may be used to list task names, assumptions, or any other references.
Video overview
The following video provides a visual overview of using the Results table in AdSec:
Note
This video provides a visual overview of the Results table. It may have been recorded using an earlier version of AdSec, so some details may differ from the version you have installed. ``